Problems at use | Problèmes à l'utilisation
|
brianw, Saturday 22 March 2014 à 03:20
|
|
Subscription date : 25 April 2012
Messages : 270
|
(Message added on the task #317)
As I described in the topic the original reporter of this bug does not have an actual cpu temperature in the sensors output
The nouveau-pci-0100 is the temperature of the GPU (graphics processor).
The k10temp-pci-00c3, on some systems, is a relative temperature (explaination found here https://www.kernel.org/doc/Documentation/hwmon/k10temp at the bottom of the page) and is not an actual temperature.
There is a problem with the cpu temperature on the Icon as I describe in the topic thread and I also provide a solution. |
|
matttbe, Thursday 01 May 2014 à 20:33
|
|
Subscription date : 24 January 2009
Messages : 12573
|
(Message added on the task #317)
@briaw: thank you for having opened this task and your analyse of this problem. (and sorry for the very long delay...)
So do you think that we have to skip all sensors with a name starting with k10temp? |
|
matttbe, Thursday 01 May 2014 à 20:37
|
|
Subscription date : 24 January 2009
Messages : 12573
|
@fabounet: why do we have a fCpuTempPercent variable? Is it compared to the max value? |
|
matttbe, Thursday 01 May 2014 à 20:54
|
|
Subscription date : 24 January 2009
Messages : 12573
|
Ok, about the first problem (the value displayed in the label was not correct), I found what was wrong, thanks to brianw for its analyse 
It's now fixed in the rev 3072 |
|
Guest, Friday 09 May 2014 à 07:13
|
|
|
I am having this issue as well. The temperature is always off by about 10 degrees C. Here is the current temp according to the applet:
http://i.imgur.com/kTQ6NhV.png
Here is my output from sensors:
andy-Peppermint ~ $ sensors
acpitz-virtual-0
Adapter: Virtual device
temp1: +61.0°C (crit = +103.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +61.0°C (high = +86.0°C, crit = +100.0°C)
Core 0: +59.0°C (high = +86.0°C, crit = +100.0°C)
Core 1: +61.0°C (high = +86.0°C, crit = +100.0°C)
asus-isa-0000
Adapter: ISA adapter
temp1: +61.0°C
I am running Cairo-Dock 3.3.2 and System Monitor 1.0.13 |
|
brianw, Friday 09 May 2014 à 17:15
|
|
Subscription date : 25 April 2012
Messages : 270
|
Based on your temp of 61 and high of 86 you are probably seeing around 71. What you are seeing is a percentage as matttbe stated.
According to matttbe the fix is in but I assume will need time to work through the process of integration. If you update through the weekly ppa you will probably see a fix much faster than through your distributions packages.
Something to note is that if your high temp is 100 the percent and the actual temperature should be the same (after all percent is based on 100%) |
Subscription date : 09 May 2014
Messages : 4
|
Yes, it appears to have been fixed with the last weekly update. Thanks matttbe and everyone else  |
Problems at use | Problèmes à l'utilisation
|
English
Online users :