Home Forums Wiki Doc Install Extras Screenshots Source Code Projects Blog Users Groups Register
Glx-Dock / Cairo-Dock List of forums Technical discussions | Discussions techniques [Renommé] Une Applet pour Deezer !
The latest stable release is the *3.4.0* : How to install it here.
Note: We just switched from BZR to Git on Github! (only to host the code and your future pull requests)
Technical discussions | Discussions techniques

Subjects Author Language Messages Last message
[Renommé] Une Applet pour Deezer !
Page : 1 2 3
nochka85 Français 57 Guest [Read]
14 June 2018 à 13:34

nochka85, Tuesday 20 May 2008 à 18:58 | Quote


Subscription date : 29 November 2007
Messages : 7408
J'ai 2 questions un peu techniques qui vont peut être vous paraître stupide car je n'y connais rien en programmation et je ne sais pas les "limites" ... mais je me lance quand même :

1 - Est-ce que techniquement on est capable de surveiller les onglets de firefox pour savoir les adresses qui sont ouvertes ?
2 - Dans l'hypothèse ou une adresse (ou du moins un site) était ouverte dans un onglet (et détectable par une applet), est-ce faisable de récupérer en temps réel des éléments de cette page (qui se trouvent toujours au même endroit sur la page) et de les afficher dans une applet ?

Pourquoi ces questions ? ..... je vous laisse d'abord répondre et ensuite je vous ferais part de ce à quoi j'ai pensé (et que je n'ai vu nulle part ailleurs )

Je vous dirais juste que cela commence par un D et que cela finit par in R

EDIT : D'ailleurs une troisième question tant que j'y suis ... Donc : 3- Peut on "piloter" une page internet depuis une application externe (c'est à dire que si une page internet bien précise possède un "bouton" , est-ce que l'on sait programmer le fait d'appuyer sur ce bouton) ?

fabounet, Tuesday 20 May 2008 à 19:16 | Quote


Subscription date : 30 November 2007
Messages : 17118
1/ non
2/ 2 pas d'avantage

enfin ceci si comme je le pense firefox n'a pas d'interface de communication du genre DBus. à vérifier / à voir pour d'autres navigateurs.

3/ j'aurai tendance à dire que non mais par contre tu peux charger des adresses avec des données pré-remplies (comme l'adresse de la page qe tu lis en ce moment )

parAdOxxx_ZeRo, Tuesday 20 May 2008 à 19:19 | Quote


Subscription date : 14 January 2008
Messages : 1122
ya des navigateurs en ligne de commande aussi faut pas les oublier...

nochka85, Tuesday 20 May 2008 à 19:25 | Quote


Subscription date : 29 November 2007
Messages : 7408
1/ non
2/ 2 pas d'avantage


-> Firefox n'envois pas de signal DBus ?

ya des navigateurs en ligne de commande aussi faut pas les oublier...


Donc finalement, c'est oui ??

parAdOxxx_ZeRo, Tuesday 20 May 2008 à 19:30 | Quote


Subscription date : 14 January 2008
Messages : 1122
A toi de nous le dire nochka :

lynx
LYNX(1) LYNX(1)

NAME
lynx - a general purpose distributed information browser for the World
Wide Web

SYNOPSIS
lynx [options] [path or URL]

use "lynx -help" to display a complete list of current options.

DESCRIPTION
Lynx is a fully-featured World Wide Web (WWW) client for users running
cursor-addressable, character-cell display devices (e.g., vt100
terminals, vt100 emulators running on Windows 95/NT or Macintoshes, or
any other "curses-oriented" display). It will display hypertext markup
language (HTML) documents containing links to files residing on the
local system, as well as files residing on remote systems running
Gopher, HTTP, FTP, WAIS, and NNTP servers. Current versions of Lynx
run on Unix, VMS, Windows 95/NT, 386DOS and OS/2 EMX.

Lynx can be used to access information on the World Wide Web, or to
build information systems intended primarily for local access. For
example, Lynx has been used to build several Campus Wide Information
Systems (CWIS). In addition, Lynx can be used to build systems
isolated within a single LAN.

OPTIONS
At start up, Lynx will load any local file or remote URL specified at
the command line. For help with URLs, press "?" or "H" while running
Lynx. Then follow the link titled, "Help on URLs."

If more than one local file or remote URL is listed on the command
line, Lynx will open only the last interactively. All of the names
(local files and remote URLs) are added to the G)oto history.

Lynx uses only long option names. Option names can begin with double
dash as well, underscores and dashes can be intermixed in option names
(in the reference below options are with one dash before them and with
underscores).

Lynx provides many command-line options. Some options require a value
(string, number or keyword). These are noted in the reference below.
The other options set boolean values in the program. There are three
types of boolean options: set, unset and toggle. If no option value is
given, these have the obvious meaning: set (to true), unset (to false),
or toggle (between true/false). For any of these, an explicit value
can be given in different forms to allow for operating system
constraints, e.g.,
-center:off
-center=off
-center-
Lynx recognizes "1", "+", "on" and "true" for true values, and "0",
"-", "off" and "false" for false values. Other option-values are
ignored.

The default boolean, number and string option values that are compiled
into lynx are displayed in the help-message provided by lynx -help.
Some of those may differ according to how lynx was built; see the help
message itself for these values. The -help option is processed before
any option, including those that control reading from the lynx.cfg
file. Therefore runtime configuration values are not reflected in the
help-message.

- If the argument is only ’-’, then Lynx expects to receive the
arguments from the standard input. This is to allow for the
potentially very long command line that can be associated with
the -get_data or -post_data arguments (see below). It can also
be used to avoid having sensitive information in the invoking
command line (which would be visible to other processes on most
systems), especially when the -auth or -pauth options are used.

-accept_all_cookies
accept all cookies.

-anonymous
apply restrictions for anonymous account, see also
-restrictions.

-assume_charset=MIMEname
charset for documents that don’t specify it.

-assume_local_charset=MIMEname
charset assumed for local files, i.e., files which lynx creates
such as internal pages for the options menu.

-assume_unrec_charset=MIMEname
use this instead of unrecognized charsets.

-auth=ID:PASSWD
set authorization ID and password for protected documents at
startup. Be sure to protect any script files which use this
switch.

-base prepend a request URL comment and BASE tag to text/html outputs
for -source dumps.

-bibp=URL
specify a local bibp server (default http://bibhost/).

-blink forces high intensity background colors for color mode, if
available and supported by the terminal. This applies to the
slang library (for a few terminal emulators), or to OS/2 EMX
with ncurses.

-book use the bookmark page as the startfile. The default or command
line startfile is still set for the Main screen command, and
will be used if the bookmark page is unavailable or blank.

-buried_news
toggles scanning of news articles for buried references, and
converts them to news links. Not recommended because email
addresses enclosed in angle brackets will be converted to false
news links, and uuencoded messages can be trashed.

-cache=NUMBER
set the NUMBER of documents cached in memory. The default is
10.

-case enable case-sensitive string searching.

-center
Toggle center alignment in HTML TABLE.

-cfg=FILENAME
specifies a Lynx configuration file other than the default
lynx.cfg.

-child exit on left-arrow in startfile, and disable save to disk.

-cmd_log=FILENAME
write keystroke commands and related information to the
specified file.

-cmd_script=FILENAME
read keystroke commands from the specified file. You can use
the data written using the -cmd_log option. Lynx will ignore
other information which the command-logging may have written to
the logfile. Each line of the command script contains either a
comment beginning with "#", or a keyword:

exit causes the script to stop, and forces Lynx to exit
immediately.

key the character value, in printable form. Cursor and other
special keys are given as names, e.g., "Down Arrow".
Printable 7-bit ASCII codes are given as-is, and hexadecimal
values represent other 8-bit codes.

set followed by a "name=value" allows one to override values set
in the lynx.cfg file.

-color forces color mode on, if available. Default color control
sequences which work for many terminal types are assumed if the
terminal capability description does not specify how to handle
color. Lynx needs to be compiled with the slang library for
this flag, it is equivalent to setting the COLORTERM environment
variable. (If color support is instead provided by a color-
capable curses library like ncurses, Lynx relies completely on
the terminal description to determine whether color mode is
possible, and this flag is not needed and thus unavailable.) A
saved show_color=always setting found in a .lynxrc file at
startup has the same effect. A saved show_color=never found in
.lynxrc on startup is overridden by this flag.

-connect_timeout=N
Sets the connection timeout, where N is given in seconds.

-cookie_file=FILENAME
specifies a file to use to read cookies. If none is specified,
the default value is ~/.lynx_cookies for most systems, but
~/cookies for MS-DOS.

-cookie_save_file=FILENAME
specifies a file to use to store cookies. If none is specified,
the value given by -cookie_file is used.

-cookies
toggles handling of Set-Cookie headers.

-core toggles forced core dumps on fatal errors. Turn this option off
to ask Lynx to force a core dump if a fatal error occurs.

-crawl with -traversal, output each page to a file. with -dump, format
output as with -traversal, but to the standard output.

-curses_pads
toggles the use of curses "pad" feature which supports
left/right scrolling of the display.

-debug_partial
separate incremental display stages with MessageSecs delay

-delay add DebugSecs delay after each progress-message

-display=DISPLAY
set the display variable for X rexec-ed programs.

-display_charset=MIMEname
set the charset for the terminal output.

-dont_wrap_pre
inhibit wrapping of text in <pre> when -dump’ing and -crawl’ing,
mark wrapped lines in interactive session.

-dump dumps the formatted output of the default document or those
specified on the command line to standard output. Unlike
interactive mode, all documents are processed. This can be used
in the following way:

lynx -dump http://www.subir.com/lynx.html

-editor=EDITOR
enable external editing, using the specified EDITOR. (vi, ed,
emacs, etc.)

-emacskeys
enable emacs-like key movement.

-enable_scrollback
toggles compatibility with communication programs’ scrollback
keys (may be incompatible with some curses packages).

-error_file=FILE
define a file where Lynx will report HTTP access codes.

-exec enable local program execution (normally not configured).

-fileversions
include all versions of files in local VMS directory listings.

-find_leaks
toggle memory leak-checking. Normally this is not compiled-into
your executable, but when it is, it can be disabled for a
session.

-force_empty_hrefless_a
force HREF-less ’A’ elements to be empty (close them as soon as
they are seen).

-force_html
forces the first document to be interpreted as HTML.

-force_secure
toggles forcing of the secure flag for SSL cookies.

-forms_options
toggles whether the Options Menu is key-based or form-based.

-from toggles transmissions of From headers.

-ftp disable ftp access.

-get_data
properly formatted data for a get form are read in from the
standard input and passed to the form. Input is terminated by a
line that starts with ’---’.

-head send a HEAD request for the mime headers.

-help print the Lynx command syntax usage message.

-hiddenlinks=[option]
control the display of hidden links.

merge hidden links show up as bracketed numbers and are numbered
together with other links in the sequence of their occurrence in
the document.

listonly hidden links are shown only on L)ist screens and
listings generated by -dump or from the P)rint menu, but appear
separately at the end of those lists. This is the default
behavior.

ignore hidden links do not appear even in listings.

-historical
toggles use of ’>’ or ’-->’ as a terminator for comments.

-homepage=URL
set homepage separate from start page.

-image_links
toggles inclusion of links for all images.

-index=URL
set the default index file to the specified URL.

-ismap toggles inclusion of ISMAP links when client-side MAPs are
present.

-justify
do justification of text.

-link=NUMBER
starting count for lnk#.dat files produced by -crawl.

-listonly
for -dump, show only the list of links.

-localhost
disable URLs that point to remote hosts.

-locexec
enable local program execution from local files only (if Lynx
was compiled with local execution enabled).

-lss=FILENAME
specify filename containing color-style information. The
default is lynx.lss.

-mime_header
prints the MIME header of a fetched document along with its
source.

-minimal
toggles minimal versus valid comment parsing.

-nested_tables
toggles nested-tables logic (for debugging).

-newschunksize=NUMBER
number of articles in chunked news listings.

-newsmaxchunk=NUMBER
maximum news articles in listings before chunking.

-nobold
disable bold video-attribute.

-nobrowse
disable directory browsing.

-nocc disable Cc: prompts for self copies of mailings. Note that this
does not disable any CCs which are incorporated within a mailto
URL or form ACTION.

-nocolor
force color mode off, overriding terminal capabilities and any
-color flags, COLORTERM variable, and saved .lynxrc settings.

-noexec
disable local program execution. (DEFAULT)

-nofilereferer
disable transmissions of Referer headers for file URLs.

-nolist
disable the link list feature in dumps.

-nolog disable mailing of error messages to document owners.

-nomargins
disable left/right margins in the default style sheet.

-nonrestarting_sigwinch
This flag is not available on all systems, Lynx needs to be
compiled with HAVE_SIGACTION defined. If available, this flag
may cause Lynx to react more immediately to window changes when
run within an xterm.

-nonumbers
disable link- and field-numbering. This overrides
-number_fields and -number_links.

-nopause
disable forced pauses for statusline messages.

-noprint
disable most print functions.

-noredir
prevents automatic redirection and prints a message with a link
to the new URL.

-noreferer
disable transmissions of Referer headers.

-noreverse
disable reverse video-attribute.

-nosocks
disable SOCKS proxy usage by a SOCKSified Lynx.

-nostatus
disable the retrieval status messages.

-notitle
disable title and blank line from top of page.

-nounderline
disable underline video-attribute.

-number_fields
force numbering of links as well as form input fields

-number_links
force numbering of links.

-partial
toggles display partial pages while loading.

-partial_thres=NUMBER
number of lines to render before repainting display with
partial-display logic

-pauth=ID:PASSWD
set authorization ID and password for a protected proxy server
at startup. Be sure to protect any script files which use this
switch.

-popup toggles handling of single-choice SELECT options via popup
windows or as lists of radio buttons.

-post_data
properly formatted data for a post form are read in from the
standard input and passed to the form. Input is terminated by a
line that starts with ’---’.

-preparsed
show HTML source preparsed and reformatted when used with
-source or in source view.

-prettysrc
show HTML source view with lexical elements and tags in color.

-print enable print functions. (default)

-pseudo_inlines
toggles pseudo-ALTs for inline images with no ALT string.

-raw toggles default setting of 8-bit character translations or CJK
mode for the startup character set.

-realm restricts access to URLs in the starting realm.

-reload
flushes the cache on a proxy server (only the first document
affected).

-restrictions=[option][,option][,option]...
allows a list of services to be disabled selectively. Dashes and
underscores in option names can be intermixed. The following
list is printed if no options are specified.

all - restricts all options listed below.

bookmark - disallow changing the location of the bookmark file.

bookmark_exec - disallow execution links via the bookmark file.

change_exec_perms - disallow changing the eXecute permission on
files (but still allow it for directories) when local file
management is enabled.

default - same as command line option -anonymous. Disables
default services for anonymous users. Set to all restricted,
except for: inside_telnet, outside_telnet, inside_ftp,
outside_ftp, inside_rlogin, outside_rlogin, inside_news,
outside_news, telnet_port, jump, mail, print, exec, and goto.
The settings for these, as well as additional goto restrictions
for specific URL schemes that are also applied, are derived from
definitions within userdefs.h.

dired_support - disallow local file management.

disk_save - disallow saving to disk in the download and print
menus.

dotfiles - disallow access to, or creation of, hidden (dot)
files.

download - disallow some downloaders in the download menu (does
not imply disk_save restriction).

editor - disallow external editing.

exec - disable execution scripts.

exec_frozen - disallow the user from changing the local
execution option.

externals - disallow some "EXTERNAL" configuration lines if
support for passing URLs to external applications (with the
EXTERN command) is compiled in.

file_url - disallow using G)oto, served links or bookmarks for
file: URLs.

goto - disable the ’g’ (goto) command.

inside_ftp - disallow ftps for people coming from inside your
domain (utmp required for selectivity).

inside_news - disallow USENET news posting for people coming
from inside your domain (utmp required for selectivity).

inside_rlogin - disallow rlogins for people coming from inside
your domain (utmp required for selectivity).

inside_telnet - disallow telnets for people coming from inside
your domain (utmp required for selectivity).

jump - disable the ’j’ (jump) command.

multibook - disallow multiple bookmarks.

mail - disallow mail.

news_post - disallow USENET News posting.

options_save - disallow saving options in .lynxrc.

outside_ftp - disallow ftps for people coming from outside your
domain (utmp required for selectivity).

outside_news - disallow USENET news reading and posting for
people coming from outside your domain (utmp required for
selectivity). This restriction applies to "news", "nntp",
"newspost", and "newsreply" URLs, but not to "snews",
"snewspost", or "snewsreply" in case they are supported.

outside_rlogin - disallow rlogins for people coming from outside
your domain (utmp required for selectivity).

outside_telnet - disallow telnets for people coming from outside
your domain (utmp required for selectivity).

print - disallow most print options.

shell - disallow shell escapes and lynxexec or lynxprog G)oto’s.

suspend - disallow Unix Control-Z suspends with escape to shell.

telnet_port - disallow specifying a port in telnet G)oto’s.

useragent - disallow modifications of the User-Agent header.

-resubmit_posts
toggles forced resubmissions (no-cache) of forms with method
POST when the documents they returned are sought with the
PREV_DOC command or from the History List.

-rlogin
disable recognition of rlogin commands.

-scrollbar
toggles showing scrollbar.

-scrollbar_arrow
toggles showing arrows at ends of the scrollbar.

-selective
require .www_browsable files to browse directories.

-short_url
show very long URLs in the status line with "..." to represent
the portion which cannot be displayed. The beginning and end of
the URL are displayed, rather than suppressing the end.

-show_cursor
If enabled the cursor will not be hidden in the right hand
corner but will instead be positioned at the start of the
currently selected link. Show cursor is the default for systems
without FANCY_CURSES capabilities. The default configuration
can be changed in userdefs.h or lynx.cfg. The command line
switch toggles the default.

-show_rate
If enabled the transfer rate is shown in bytes/second. If
disabled, no transfer rate is shown. Use lynx.cfg or the
options menu to select KB/second and/or ETA.

-soft_dquotes
toggles emulation of the old Netscape and Mosaic bug which
treated ’>’ as a co-terminator for double-quotes and tags.

-source
works the same as dump but outputs HTML source instead of
formatted text. For example

lynx -source . >foo.html

generates HTML source listing the files in the current
directory. Each file is marked by an HREF relative to the
parent directory. Add a trailing slash to make the HREF’s
relative to the current directory:

lynx -source ./ >foo.html

-stack_dump
disable SIGINT cleanup handler

-startfile_ok
allow non-http startfile and homepage with -validate.

-stderr
When dumping a document using -dump or -source, Lynx normally
does not display alert (error) messages that you see on the
screen in the status line. Use the -stderr option to tell Lynx
to write these messages to the standard error.

-stdin read the startfile from standard input (UNIX only).

-syslog=text
information for syslog call.

-syslog-urls
log requested URLs with syslog.

-tagsoup
initialize parser, using Tag Soup DTD rather than SortaSGML.

-telnet
disable recognition of telnet commands.

-term=TERM
tell Lynx what terminal type to assume it is talking to. (This
may be useful for remote execution, when, for example, Lynx
connects to a remote TCP/IP port that starts a script that, in
turn, starts another Lynx process.)

-timeout=N
For win32, sets the network read-timeout, where N is given in
seconds.

-tlog toggles between using a Lynx Trace Log and stderr for trace
output from the session.

-tna turns on "Textfields Need Activation" mode.

-trace turns on Lynx trace mode. Destination of trace output depends
on -tlog.

-trace_mask=value
turn on optional traces, which may result in very large trace
files. Logically OR the values to combine options:
1=SGML character parsing states
2=color-style
4=TRST (table layout)
8=config (lynx.cfg and .lynxrc contents)
16=binary string copy/append, used in form data construction.

-traversal
traverse all http links derived from startfile. When used with
-crawl, each link that begins with the same string as startfile
is output to a file, intended for indexing. See CRAWL.announce
for more information.

trim_input_fields
trim input text/textarea fields in forms.

-underline_links
toggles use of underline/bold attribute for links.

-underscore
toggles use of _underline_ format in dumps.

-use_mouse
turn on mouse support, if available. Clicking the left mouse
button on a link traverses it. Clicking the right mouse button
pops back. Click on the top line to scroll up. Click on the
bottom line to scroll down. The first few positions in the top
and bottom line may invoke additional functions. Lynx must be
compiled with ncurses or slang to support this feature. If
ncurses is used, clicking the middle mouse button pops up a
simple menu. Mouse clicks may only work reliably while Lynx is
idle waiting for input.

-useragent=Name
set alternate Lynx User-Agent header.

-validate
accept only http URLs (for validation). Complete security
restrictions also are implemented.

-verbose
toggle [LINK], [IMAGE] and [INLINE] comments with filenames of
these images.

-version
print version information.

-vikeys
enable vi-like key movement.

-wdebug
enable Waterloo tcp/ip packet debug (print to watt debugfile).
This applies only to DOS versions compiled with WATTCP or
WATT-32.

-width=NUMBER
number of columns for formatting of dumps, default is 80.

-with_backspaces
emit backspaces in output if -dump’ing or -crawl’ing (like ’man’
does)

COMMANDS
o Use Up arrow and Down arrow to scroll through hypertext links.

o Right arrow or Return will follow a highlighted hypertext link.

o Left Arrow will retreat from a link.

o Type "H" or "?" for online help and descriptions of key-stroke
commands.

o Type "K" for a complete list of the current key-stroke command
mappings.

ENVIRONMENT
In addition to various "standard" environment variables such as HOME,
PATH, USER, DISPLAY, TMPDIR, etc, Lynx utilizes several Lynx-specific
environment variables, if they exist.

Others may be created or modified by Lynx to pass data to an external
program, or for other reasons. These are listed separately below.

See also the sections on SIMULATED CGI SUPPORT and NATIVE LANGUAGE
SUPPORT, below.

Note: Not all environment variables apply to all types of platforms
supported by Lynx, though most do. Feedback on platform dependencies
is solicited.

Environment Variables Used By Lynx:

COLORTERM If set, color capability for the terminal is forced
on at startup time. The actual value assigned to
the variable is ignored. This variable is only
meaningful if Lynx was built using the slang
screen-handling library.

LYNX_CFG This variable, if set, will override the default
location and name of the global configuration file
(normally, lynx.cfg) that was defined by the
LYNX_CFG_FILE constant in the userdefs.h file,
during installation. See the userdefs.h file for
more information.

LYNX_LOCALEDIR If set, this variable overrides the compiled-in
location of the locale directory which contains
native language (NLS) message text.

LYNX_LSS This variable, if set, specifies the location of
the default Lynx character style sheet file.
[Currently only meaningful if Lynx was built using
experimental color style support.]

LYNX_SAVE_SPACE This variable, if set, will override the default
path prefix for files saved to disk that is defined
in the lynx.cfg SAVE_SPACE: statement. See the
lynx.cfg file for more information.

LYNX_TEMP_SPACE This variable, if set, will override the default
path prefix for temporary files that was defined
during installation, as well as any value that may
be assigned to the TMPDIR variable.

MAIL This variable specifies the default inbox Lynx will
check for new mail, if such checking is enabled in
the lynx.cfg file.

NEWS_ORGANIZATION This variable, if set, provides the string used in
the Organization: header of USENET news postings.
It will override the setting of the ORGANIZATION
environment variable, if it is also set (and, on
UNIX, the contents of an /etc/organization file, if
present).

NNTPSERVER If set, this variable specifies the default NNTP
server that will be used for USENET news reading
and posting with Lynx, via news: URL’s.

ORGANIZATION This variable, if set, provides the string used in
the Organization: header of USENET news postings.
On UNIX, it will override the contents of an
/etc/organization file, if present.

PROTOCOL_proxy Lynx supports the use of proxy servers that can act
as firewall gateways and caching servers. They are
preferable to the older gateway servers (see
WWW_access_GATEWAY, below). Each protocol used by
Lynx, (http, ftp, gopher, etc), can be mapped
separately by setting environment variables of the
form PROTOCOL_proxy (literally: http_proxy,
ftp_proxy, gopher_proxy, etc), to
"http://some.server.dom:port/". See Lynx Users
Guide for additional details and examples.

SSL_CERT_DIR Set to the directory containing trusted
certificates.

SSL_CERT_FILE Set to the full path and filename for your file of
trusted certificates.

WWW_access_GATEWAY Lynx still supports use of gateway servers, with
the servers specified via "WWW_access_GATEWAY"
variables (where "access" is lower case and can be
"http", "ftp", "gopher" or "wais"), however most
gateway servers have been discontinued. Note that
you do not include a terminal ’/’ for gateways, but
do for proxies specified by PROTOCOL_proxy
environment variables. See Lynx Users Guide for
details.

WWW_HOME This variable, if set, will override the default
startup URL specified in any of the Lynx
configuration files.

Environment Variables Set or Modified By Lynx:

LYNX_PRINT_DATE This variable is set by the Lynx p(rint) function,
to the Date: string seen in the document’s
"Information about" page (= cmd), if any. It is
created for use by an external program, as defined
in a lynx.cfg PRINTER: definition statement. If
the field does not exist for the document, the
variable is set to a null string under UNIX, or "No
Date" under VMS.

LYNX_PRINT_LASTMOD This variable is set by the Lynx p(rint) function,
to the Last Mod: string seen in the document’s
"Information about" page (= cmd), if any. It is
created for use by an external program, as defined
in a lynx.cfg PRINTER: definition statement. If
the field does not exist for the document, the
variable is set to a null string under UNIX, or "No
LastMod" under VMS.

LYNX_PRINT_TITLE This variable is set by the Lynx p(rint) function,
to the Linkname: string seen in the document’s
"Information about" page (= cmd), if any. It is
created for use by an external program, as defined
in a lynx.cfg PRINTER: definition statement. If
the field does not exist for the document, the
variable is set to a null string under UNIX, or "No
Title" under VMS.

LYNX_PRINT_URL This variable is set by the Lynx p(rint) function,
to the URL: string seen in the document’s
"Information about" page (= cmd), if any. It is
created for use by an external program, as defined
in a lynx.cfg PRINTER: definition statement. If
the field does not exist for the document, the
variable is set to a null string under UNIX, or "No
URL" under VMS.

LYNX_TRACE If set, causes Lynx to write a trace file as if the
-trace option were supplied.

LYNX_TRACE_FILE If set, overrides the compiled-in name of the trace
file, which is either Lynx.trace or LY-TRACE.LOG
(the latter on the DOS platform). The trace file
is in either case relative to the home directory.

LYNX_VERSION This variable is always set by Lynx, and may be
used by an external program to determine if it was
invoked by Lynx. See also the comments in the
distribution’s sample mailcap file, for notes on
usage in such a file.

TERM Normally, this variable is used by Lynx to
determine the terminal type being used to invoke
Lynx. If, however, it is unset at startup time (or
has the value "unknown"), or if the -term command-
line option is used (see OPTIONS section above),
Lynx will set or modify its value to the user
specified terminal type (for the Lynx execution
environment). Note: If set/modified by Lynx, the
values of the LINES and/or COLUMNS environment
variables may also be changed.

SIMULATED CGI SUPPORT
If built with the cgi-links option enabled, Lynx allows access to a cgi
script directly without the need for an http daemon.

When executing such "lynxcgi scripts" (if enabled), the following
variables may be set for simulating a CGI environment:

CONTENT_LENGTH

CONTENT_TYPE

DOCUMENT_ROOT

HTTP_ACCEPT_CHARSET

HTTP_ACCEPT_LANGUAGE

HTTP_USER_AGENT

PATH_INFO

PATH_TRANSLATED

QUERY_STRING

REMOTE_ADDR

REMOTE_HOST

REQUEST_METHOD

SERVER_SOFTWARE

Other environment variables are not inherited by the script, unless
they are provided via a LYNXCGI_ENVIRONMENT statement in the
configuration file. See the lynx.cfg file, and the (draft) CGI 1.1
Specification <http://Web.Golux.Com/coar/cgi/draft-coar-cgi-v11-00.txt>
for the definition and usage of these variables.

The CGI Specification, and other associated documentation, should be
consulted for general information on CGI script programming.

NATIVE LANGUAGE SUPPORT
If configured and installed with Native Language Support, Lynx will
display status and other messages in your local language. See the file
ABOUT_NLS in the source distribution, or at your local GNU site, for
more information about internationalization.

The following environment variables may be used to alter default
settings:

LANG This variable, if set, will override the default
message language. It is an ISO 639 two-letter code
identifying the language. Language codes are NOT
the same as the country codes given in ISO 3166.

LANGUAGE This variable, if set, will override the default
message language. This is a GNU extension that has
higher priority for setting the message catalog
than LANG or LC_ALL.

LC_ALL and

LC_MESSAGES These variables, if set, specify the notion of
native language formatting style. They are POSIXly
correct.

LINGUAS This variable, if set prior to configuration,
limits the installed languages to specific values.
It is a space-separated list of two-letter codes.
Currently, it is hard-coded to a wish list.

NLSPATH This variable, if set, is used as the path prefix
for message catalogs.

NOTES
This is the Lynx v2.8.6 Release; development is in progress for 2.8.7.

If you wish to contribute to the further development of Lynx, subscribe
to our mailing list. Send email to <lynx-dev-request@nongnu.org> with
"subscribe lynx-dev" as the only line in the body of your message.

Send bug reports, comments, suggestions to <lynx-dev@nongnu.org> after
subscribing.

Unsubscribe by sending email to <lynx-dev-request@nongnu.org> with
"unsubscribe lynx-dev" as the only line in the body of your message.
Do not send the unsubscribe message to the lynx-dev list, itself.

SEE ALSO
catgets(3), curses(3), environ(7), execve(2), ftp(1), gettext(GNU),
localeconv(3), ncurses(3), setlocale(3), slang(?), termcap(5),
terminfo(5), wget(GNU)

Note that man page availability and section numbering is somewhat plat&#8208;
form dependent, and may vary from the above references.

A section shown as (GNU), is intended to denote that the topic may be
available via an info page, instead of a man page (i.e., try "info sub&#8208;
ject", rather than "man subject").

A section shown as (?) denotes that documentation on the topic exists,
but is not part of an established documentation retrieval system (see
the distribution files associated with the topic, or contact your Sys&#8208;
tem Administrator for further information).

ACKNOWLEDGMENTS
Lynx has incorporated code from a variety of sources along the way.
The earliest versions of Lynx included code from Earl Fogel of Comput&#8208;
ing Services at the University of Saskatchewan, who implemented HYPER&#8208;
REZ in the Unix environment. HYPERREZ was developed by Niel Larson of
Think.com and served as the model for the early versions of Lynx.
Those versions also incorporated libraries from the Unix Gopher clients
developed at the University of Minnesota, and the later versions of
Lynx rely on the WWW client library code developed by Tim Berners-Lee
and the WWW community. Also a special thanks to Foteos Macrides who
ported much of Lynx to VMS and did or organized most of its development
since the departures of Lou Montulli and Garrett Blythe from the Uni&#8208;
versity of Kansas in the summer of 1994 through the release of v2.7.2,
and to everyone on the net who has contributed to Lynx’s development
either directly (through patches, comments or bug reports) or indirect&#8208;
ly (through inspiration and development of other systems).

AUTHORS
Lou Montulli, Garrett Blythe, Craig Lavender, Michael Grobe, Charles
Rezac
Academic Computing Services
University of Kansas
Lawrence, Kansas 66047

Foteos Macrides
Worcester Foundation for Biomedical Research
Shrewsbury, Massachusetts 01545

Thomas E. Dickey
<dickey@invisible-island.net>

Local LYNX(1)


links
LINKS2(1) LINKS2(1)

NAME
links - lynx-like alternative character mode WWW browser

SYNOPSIS
links2 [options] URL

DESCRIPTION
links2 is a text mode WWW browser with ncurses interface, supporting
colors, correct table rendering, background downloading, menu driven
configuration interface and slim code.

Frames are supported. You can have different file formats associated
with external viewers. mailto: and telnet: are supported via external
clients.

links2 can handle local (file://) or remote (http:// or ftp://) URLs.

OPTIONS
Most options can be set in the user interface or config file, so usuâ&#128;?
ally you do not need to care about them.

-g Run Links2 in graphics mode. If not given, Links2 will run in
text mode. Running in graphics mode means that Links2 will
probe all compiledâ&#128;?in graphics devices and run on the first
found. If none found, links2 will not run in text mode. This
option works only if â&#128;?â&#128;?enableâ&#128;?graphics was given to ./configure.

-no-g Run in text mode (overrides previous -g).

-driver <driver name>
Graphics driver to use. Drivers are: x, svgalib, fb, directfb,
pmshell, atheos. List of drivers will be shown if you give it
an unknown driver. Available drivers depend on your operating
system and available libraries.

-mode <parameter>
Pass a parameter to the graphics driver. On SVGAlib, this is
widthxheightxdepth, (where depth is 16, 256, 32K, 64K, 16M or
16M32) and defines the graphics mode, on X the format is WIDTHxâ&#128;?
HEIGHT and defines the window size.

-display <x-display>
Set Xwindow display.

-force-html
Treat files with unknown type as html rather than text. (can be
toggled with â&#128;&#153;\â&#128;&#153; key)

-source <url>
Write unformatted data stream to stdout.

-dump <url>
Write formatted document to stdout.

-width <number>
For dump, document will be formatted to this screen width (but
it can still exceed it if lines canâ&#128;&#153;t be broken).

-codepage <codepage>
For dump, convert output to specified character set -- for eaxmâ&#128;?
ple iso-8859-2, windows-1250.

-anonymous
Restrict links so that it can run on an anonymous account. No
local file browsing. No downloads. Executing of viewers is
allowed, but user canâ&#128;&#153;t add or modify entries in association taâ&#128;?
ble.

-no-connect
Runs links2 as a separate instance - instead of connecting to
existing instance.

-download-utime <0>/<1>
Set time of downloaded files to last modification time reported
by server.

-async-dns <0>/<1>
Asynchronous DNS resolver on(1)/off(0).

-max-connections <max>
Maximum number of concurrent connections. (default: 10)

-max-connections-to-host <max>
Maximum number of concurrent connection to a given host.
(default: 2)

-retries <retry>
Number of retries. (default: 3)

-receive-timeout <sec>
Timeout on receive. (default: 120)

-unrestartable-receive-timeout <sec>
Timeout on non restartable connections. (default: 600)

-format-cache-size <num>
Number of formatted document pages cached. (default: 5)

-memory-cache-size <bytes>
Cache memory in Kilobytes. (default: 1024)

-image-cache-size <bytes>
Cache memory in Kilobytes. (default: 1024)

-http-proxy <host:port>
Host and port number of the HTTP proxy, or blank. (default:
blank)

-ftp-proxy <host:port>
Host and port number of the FTP proxy, or blank. (default:
blank)

-only-proxies <0>/<1>
"1" causes that Links wonâ&#128;&#153;t initiate any non-proxy connection.
It is useful for anonymization with tor or similar networks.

-download-dir <path>
Default download directory. (default: actual dir)

-language <language>
Set user interface language.

-http-bugs.http10 <0>/<1>
(default 0) "1" forces using only HTTP/1.0 protocol. (useful for
buggy servers that claim to be HTTP/1.1 compliant but are not)
"0" enables using both HTTP/1.0 and HTTP/1.1.

-http-bugs.allow-blacklist <0>/<1>
(default 1) "1" defaults to using list of servers that have broâ&#128;?
ken HTTP/1.1 support. When links2 finds such server, it will
retry the request with HTTP/1.0.

-http-bugs.bug-302-redirect <0>/<1>
(default 1) Process 302 redirect in a way that is incompatible
with RFC1945 and RFC2068, but the same as Netscape and MSIE.
Many pages depend on it.

-http-bugs.bug-post-no-keepalive <0>/<1>
(default 0) No keepalive connection after post requests. For
some buggy servers.

-http-bugs.bug-no-accept-charset <0>/<1>
(default 0) Do not send Accept-Charset field of HTTP header.
Because it is too long some servers will deny the request. Other
servers will convert content to plain ascii when Accept-Charset
is missing.

-http-bugs.no-compression <0>/<1>
(default 0) "1" causes that links wonâ&#128;&#153;t advertise HTTP compresâ&#128;?
sion support (but it will still accept compressed data). Use it
when you communicate with server that has broken compression
support.

-http-bugs.retry-internal-errors <0>/<1>
(default 0) Retry on internal server errors (50x).

-http-bugs.aggressive-cache <0>/<1>
Always cache everything regardless of serverâ&#128;&#153;s caching recomenâ&#128;?
dations. Many servers deny caching even if their content is not
changing just to get more hits and more money from ads.

-http-referer <0>/<1>
(default 0) 0 - do not send referer. 1 - send the requested URL
as referer. 2 - send fake referer. 3 - send real referer. 4 -
send real referer only to the same server.

-fake-referer <string>
Fake referer value.

-fake-user-agent <string>
Fake user agent value.

-ftp.anonymous-password <string>
Password for anonymous ftp access.

-ftp.use-passive <0>/<1>
Use ftp PASV command to bypass firewalls.

-ftp.fast <0>/<1>
Send more ftp commands simultaneously. Faster response when
browsing ftp directories, but it is incompatible with RFC and
some servers donâ&#128;&#153;t like it.

-menu-font-size <size>
Size of font in menu.

-background-color 0xRRGGBB
Set menu background color in graphics mode. RRGGBB are hex.

-foreground-color 0xRRGGBB
Set menu foreground color in graphics mode. RRGGBB are hex.

-scroll-bar-area-color 0xRRGGBB
Set color of scroll bar area. RRGGBB are hex.

-scroll-bar-bar-color 0xRRGGBB
Set color of scroll bar. RRGGBB are hex.

-scroll-bar-frame-color 0xRRGGBB
Set color of scroll bar frame. RRGGBB are hex.

-display-red-gamma <fp-value>
Red gamma of display. (default 2.2)

-display-green-gamma <fp-value>
Green gamma of display. (default 2.2)

-display-blue-gamma <fp-value>
Blue gamma of display. (default 2.2)

-user-gamma <fp-value>
Additional gamma. (defult 1)

-bfu-aspect <fp-value>
Display aspect ration.

-aspect-on <0>/<1>
Enable aspect ratio correction.

-dither-letters <0>/<1>
Do letter dithering.

-dither-images <0>/<1>
Do image dithering.

-display-optimize <0>/<1>/<2>
Optimize for CRT (0), LCD RGB (1), LCD BGR (2).

-enable-javascript <0>/<1>
Enable javascript.

-gamma-correction <0>/<1>/<2>
Type of gamma correction: (default 2) 0 - 8-bit (fast). 1 -
16-bit (slow). 2 - automatically detect according to speed of
FPU.

-js.verbose-errors <0>/<1>
Display javascript errors.

-js.verbose-warnings <0>/<1>
Display javascript warnings.

-js.enable-all-conversions <0>/<1>
Enable conversions between all types in javascript.

-js.enable-global-resolution <0>/<1>
Resolve global names.

-js.manual-confirmation <0>/<1>
Ask user to confirm potentially dangerous operations. (opening
windows, going to url etc.) Default 1.

-js.recursion-depth <integer>
Depth of javascript call stack.

-js.memory-limit <memory amount>
Amount of kilobytes the javascript may allocate.

-bookmarks-codepage <codepage>
Character set of bookmarks file.

-bookmarks-file <file>
File to store bookmarks.

-html-assume-codepage <codepage>
Use the given codepage when the webpage did not specify its
codepage. (default: ISO 8859-1)

-html-hard-assume <0>/<1>
Use always character set from "-html-assume-codepage" no matter
what server sent.

-html-tables <0>/<1>
Render tables. (0) causes tables being rendered like in lynx.

-html-frames <0>/<1>
Render frames. (0) causes frames rendered like in lynx.

-html-images <0>/<1>
Display links to unnamed images as [IMG]

-html-image-names <0>/<1>
Display filename of an image instead of [IMG].

-html-display-images <0>/<1>
Display images in graphics mode.

-html-image-scale <percent>
Scale images in graphics mode.

-html-bare-image-autoscale <0>/<1>
Autoscale images displayed in full screen.

-html-numbered-links <0>/<1>
Number links in text mode. Allow quick link selection by typing
link number and enter.

-html-table-order <0>/<1>
In text mode, walk through table by rows (0) or columns (1).

-html-auto-refresh <0>/<1>
Process refresh to other page (1), or display link to that page
(0).

-html-target-in-new-window <0>/<1>
Allow opening new windows from html.

-html-margin <number of spaces>
Margin in text mode.

-html-user-font-size <size>
Size of font on pages in graphics mode.

-lookup <hostname>
Does name lookup, like command "host".

-version
Prints the links version number and exit.

-help Printf a help screen

More options can be seen with links2 -h

NAVIGATION KEYS
The keys you may use while navigating are

ESC menu/escape

F9 menu

F10 file menu

TAB next frame

PGDN page down

Space page down

PGUP page up

b page up

B page up

CursorDOWN
next link/down (text mode), scroll down (graphics mode)

CursorUP
prev link/up (text mode), up (graphics mode)

^INS copy to clipboard

^C copy to clipboard (OS/2 only)

INS scroll up (text mode only)

^P scroll up

DEL scroll down

^N scroll down

[ scroll left

] scroll right

HOME home

END end of page

CursorRIGHT
enter link/press button (text mode), scroll right (graphics
mode)

ENTER enter link/press button

CursorLEFT
go back (text mode), scroll left (graphics mode)

d download link (text mode only)

D download link (text mode only)

/ search in the page

? search back in the page

n find next match

N find next match backwards

f zoom actual frame

F zoom actual frame

^R reload page

g go to URL

G edit the current URL and goto the result

s bookmark manager

S bookmark manager

q quit, close window if more windows are open

Q quit, close window if more windows are open

= document informations

\ toggle HTML source/rendered view

EDITING KEYS
The following keys can be used while editing a line/jumping to a URL:

CursorRIGHT
move right

CursorLEFT
move left

HOME jump at the beginning

^A jump at the beginning

END jump at the end

^E jump at the end

^INS copy to clipboard

^B copy to clipboard

^X cut to clipboard (text mode only)

^V paste from clipboard (text mode only)

ENTER enter line

BACKSPACE
delete back character

^H delete back character

DEL delete character

^D delete character

^U delete from beginning of the line

^K delete to the end of the line

^W auto complete line

FILES
~/.links2/.links.cfg
Perâ&#128;?user configfile, automatically created by links2.

PLATFORMS
links2 is known to work on Linux, FreeBSD, Solaris, IRIX, HPUX,
Digital Unix, AIX, OS/2 and BeOS. Port for Win32 is in state of
beta testing.

BUGS
Canâ&#128;&#153;t connect to some FTP servers (Novell, NT). Connection stays
in "Request sent" state.

Frames donâ&#128;&#153;t work if thereâ&#128;&#153;s more frames with same name. Turn
them off in such case.

You canâ&#128;&#153;t upload large files; it takes _lots_ of memory.

You shoudnâ&#128;&#153;t press â&#128;&#153;^Zâ&#128;&#153; when you are in a viewer

Please report any other bugs you find to Mikulas Patocka
<mikulas@artax.karlin.mff.cuni.cz>

LICENSE
links2 is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as pubâ&#128;?
lished by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.

AUTHOR
links2 was written by Mikulas Patocka, Karel â&#128;â&#128;&#153;Clockâ&#128;â&#128;&#153; Kulhavy,
Petr â&#128;â&#128;&#153;Brainâ&#128;â&#128;&#153; Kulhavy, and Martin â&#128;â&#128;&#153;PerMâ&#128;â&#128;&#153; Pergel. See file
AUTHORS for a list of people contributing to this project.

The homepage of links2 can be found at http://atrey.karâ&#128;â&#128;?
lin.mff.cuni.cz/~clock/twibright/links

This manual page was written by Peter Gervai <grin@tolna.net>,
using excerpts from a (yet?) unknown links2 fan for the Debian
GNU/Linux system (but may be used by others). Updated by Karel
Kulhavy.

SEE ALSO
lynx(1), w3m(1)

Aug, 2006 LINKS2(1)

nochka85, Tuesday 20 May 2008 à 19:42 | Quote


Subscription date : 29 November 2007
Messages : 7408
mouais .... je viens d'essayer ... mais le site est en flash

Euh même question pour des sites en flash -> On sait récupérer des infos ????

..... Bon allez, je vous dis ce que j'avais derrière la tête au cas où vous ayez une solution : J'aurais aimé que l'applet Rhytmbox (ou une autre applet dédiée) surveille Firefox pour que lorsque je lise une chanson sur Deezer ( ) , cela m'affiche la photo de l'album affiché sur le site et en quickinfo le nom de l'artiste et le titre de la chanson lue

-> Comme çà, on lance Deezer (et on écoute depuis ce dernier) en minimisant la fenêtre Firefox et l'applet affiche l'album comme si on écoutait depuis Rhythmbox

fred1987, Tuesday 20 May 2008 à 19:44 | Quote


Subscription date : 29 November 2007
Messages : 414
deezer ils ont pas une api par harzard

parAdOxxx_ZeRo, Tuesday 20 May 2008 à 19:46 | Quote


Subscription date : 14 January 2008
Messages : 1122
ah alors à une époque il me semble ils avaient mis à dispo un minilecteur accessible à distance donc genre dans un applet web... Mais ils l'ont supprimé parceque les gens sont cons...
en tout cas d'autant plus si c'est du flash euh NAN c'est pas possible sauf si on demande une collaboration avec les mecs de deezer...

nochka85, Tuesday 20 May 2008 à 19:58 | Quote


Subscription date : 29 November 2007
Messages : 7408
Bah surtout qu'on ne téléchargerait rien -> On afficherait juste une image et un texte du site qui est toujours lancé par Firefox

EDIT: Et l'applet ne s'occuperait même pas de la musique en cours

nochka85, Tuesday 20 May 2008 à 20:02 | Quote


Subscription date : 29 November 2007
Messages : 7408
sauf si on demande une collaboration avec les mecs de deezer...


Chiche ? .... si quelqu'un assez callé en programmation (un dev quoi ) pouvait les contacter pour leur demander la permission de faire un simple "afficheur de musique en cours" ....

EDIT : En plus, je viens d'y penser -> C'est un site français !

nochka85, Tuesday 20 May 2008 à 23:18 | Quote


Subscription date : 29 November 2007
Messages : 7408
Bon, et bien je viens de jeter une bouteille à la mer .... je vous tiens au courant si j'ai des nouvelles

nochka85, Sunday 01 June 2008 à 14:28 | Quote


Subscription date : 29 November 2007
Messages : 7408
Bon, pas de nouvelles du coté de Deezer

Par contre, je viens de tomber par hasard sur une applet Firefox (compatible uniquement avec windows ) qui permet d'afficher dans MSN les détails de la chanson en cours sur Deezer : http://www.speedyshare.com/170700360.html

Bref, je me disais que c'était peut être çà la solution :
- Regarder le .xpi de l'applet pour l'analyser
- Refaire une applet dans cairo-dock (ou rendre compatible Rhythmbox)
- Créer une nouveau plugin pour firefox qui "capterait" (de la même manière que le plugin ci-dessus) les infos de Deezer et les renverraient vers l'applet de Cairo-dock pour afficher (si possible) la pochette et le nom de l'artiste et de la musique en cours de lecture

Alors deux petites questions :
      • Techniquement , vu que quelqu'un a pu le faire pour msn , est-ce envisageable du coup pour cairo-dock ?
      • D'un point de vue utilisateur , est-ce que cela vous interraisserait ? -> Moi je réponds OUI !!


EDIT : D'ailleurs, ici en 2ème critique , quelqu'un souhaite l'adapter à Linux : ] https://addons.mozilla.org/fr/firefox/addon/6518

benoit2600, Sunday 01 June 2008 à 16:42 | Quote


Subscription date : 03 December 2007
Messages : 526
D'un point de vue utilisateur , est-ce que cela vous interraisserait ? -> Moi je réponds OUI !!


je suis entierement pour aussi, ce site est genial ! il permet d'écouter des album que l'on n'a pas forcement les moyens pour l'acheter (etudiant par ex) et en plus, il est légal ! donc moi je suis a 100% pour

nochka85, Sunday 01 June 2008 à 17:19 | Quote


Subscription date : 29 November 2007
Messages : 7408
il permet d'écouter des album que l'on n'a pas forcement les moyens pour l'acheter (etudiant par ex) et en plus, il est légal !


Tout à fait ! .... et en plus, une applet comme celle là serait du jamais vu ailleurs -> çà ferait une bonne pub !

EDIT : Y'a un codeur dans le coin qui saurait "décrypter" et exploiter le .xpi que j'ai fourni juste au dessus ?

benoit2600, Sunday 01 June 2008 à 17:29 | Quote


Subscription date : 03 December 2007
Messages : 526
Y'a un codeur dans le coin qui saurait "décrypter" (...) le .xpi que j'ai fourni juste au dessus ?


il suffit de l'extraire (clique droit -> extraire ici)

nochka85, Sunday 01 June 2008 à 17:38 | Quote


Subscription date : 29 November 2007
Messages : 7408
il suffit de l'extraire (clique droit -> extraire ici)


.... çà y'a pas de problème .... je parlais de pouvoir analyser le code pour créer un nouveau .xpi qui "alimenterait" en info une applet de cairo-dock

benoit2600, Sunday 01 June 2008 à 18:14 | Quote


Subscription date : 03 December 2007
Messages : 526
oh, excuse-moi, j'avais mal compris et puis la, ce n'est plus mon domaine

nochka85, Sunday 01 June 2008 à 19:00 | Quote


Subscription date : 29 November 2007
Messages : 7408
bah le mien non plus, justement

Bref, Fabounet, ChangFu, Paradoxxx , Necropotame, Cchumi et Tofe (ou tout autre personne "compétente" ) -> Là, je crois que c'est à l'un de vous de voir çà -> Un candidat pour voir la faisabilité de mon post de 14:28 ?

nostalgeek, Sunday 01 June 2008 à 21:01 | Quote


Subscription date : 12 May 2008
Messages : 140
je te conseille plutot d'essayer jamendo, car mettre un applet de zik copergitee dans un projet libre :/

fred1987, Sunday 01 June 2008 à 21:33 | Quote


Subscription date : 29 November 2007
Messages : 414
zik copergitee ?? tu peux parler français merci

Technical discussions | Discussions techniques

Subjects Author Language Messages Last message
[Renommé] Une Applet pour Deezer !
Page : 1 2 3
nochka85 Français 57 Guest [Read]
14 June 2018 à 13:34

Post a message

Anti-spam filter 2 (*) times (*) 5 =
            
Did you know ? The Mail tag encrypt the email address to protect you from spam


Glx-Dock / Cairo-Dock List of forums Technical discussions | Discussions techniques [Renommé] Une Applet pour Deezer ! Top

Online users : jayamahe,

Powered by ElementSpeak © 2007 Adrien Pilleboue, 2009-2013 Matthieu Baerts.
Dock based on CSS Dock Menu (Ndesign) with jQuery. Icons by zgegball
Cairo-Dock is a free software under GNU-GPL3 licence. First stable version created by Fabounet.
Many thanks to TuxFamily for the web Hosting and Mav for the domain name.